Sunday 30 November 2008

Fitting-out commences.....

We went to Beacon on Saturday to ok the wiring setup. As you can see from the photos, they have made a good start - the ballasting is done, and the sub-floor is down, the battenning is finished, and the wiring is all but completed ready for the spray foam insulation to be done on Wednesday.

Looking towards the stern

Looking towards the bow

XR & D's hull number

The engine

Posted by at

6 comments:

  1. Nb Yarwood30 November 2008 at 16:31

    Great photo's Pip - time will rip by now the fitout has started - best wishes

    ReplyDelete
  2. MortimerBones5 December 2008 at 12:48

    How are your battens fixed up?

    ReplyDelete
  3. Pip5 December 2008 at 15:28

    Hi Bones - They are mostly fixed to the steel internal struts/boxing with self tappers. If no other available fixing, they are screwed via other battens.

    ReplyDelete
  4. Anonymous7 December 2008 at 15:56

    Hi There,

    As Caxton says great photos which show a wealth of detail for anyone doing a fitout or keeping an eye on were wiring is for later on. Wish we had the same on NB Rivendell built 4 years ago. Look forward to following the build through the great photos.

    Cheers

    Don

    ReplyDelete
  5. Pip7 December 2008 at 17:10

    Hi Don
    Thanks for your comments - we wanted to have a full pictoral record of the build to look back on and thanks for reading the blog. I have looked for a blog for nb Rivendell to return the favour but can't find one - do you have one?


    Pip

    ReplyDelete
  6. Chas and Ann13 December 2008 at 13:22

    Hi Pip n Roger,
    We are watching progress. Hope all the wires are where you need them! Stick to the plan, dont change it now. Will always remember your kindness while we were on the Nene.
    Chas n Ann

    ReplyDelete

We love to read your comments but if you MUST comment as Anonymous, then please sign your comment with your name and/or boat name otherwise we don't know who you are

Subscribe to: Post Comments (Atom)